ALLIGATOR sens.it®
Clip-Pin Sensor RS4
Snap-In Valve with Clip-Pin Attachment
 |
Learn more |
The Snap-In version of the sensor includes ALLIGATOR’s patented Clip-Pin functionality. The Clip-Pin provides easy and quick assembly and removal of the valve, and does not require the use of a small screw to secure the sensor to the valve. The TPMS Snap-In valve is assembled to and disassembled from the rim in the same way as a standard Snap-In valve.
Please take notice of the recommendations for TPMS Snap-In Valves:
ALLIGATOR TPMS Snap-In Valves are developed for a maximum speed of 130 mph (210 km/h) and a maximum working tire pressure of 65 psi (4.5 bar). We strongly recommend the use of ALLIGATOR Clamp-In Valves and ALLIGATOR sens.it® RS3 Sensors for vehicles that are able to drive faster than 130 mph (210 km/h) and/or for tires with a working pressure of more than 65 psi (4.5 bar).
Sensor - technical details
|
 |
Valve - technical details |
|
|
ALLIGATOR part no. |
590916 |
|
Valve Type |
Snap-In |
|
Attachement |
Clip-Pin |
|
Length |
TR413 |
|
For valve hole |
11,3+0,4mm |
|
Fix angle |
20° |
|
max. Speed |
130 mph (210 km/h) |
