ALLIGATOR sens.it®
|
Snap-In Valve with Clip-Pin Attachment
 |
Learn more |
The Snap-In version of the sensor includes ALLIGATOR’s patented Clip-Pin functionality. The Clip-Pin provides easy and quick assembly and removal of the valve, and does not require the use of a small screw to secure the sensor to the valve. The TPMS Snap-In valve is assembled to and disassembled from the rim in the same way as a standard Snap-In valve.
Please take notice of the recommendations for TPMS Snap-In Valves:
ALLIGATOR TPMS Snap-In Valves are developed for a maximum speed of 130 mph (210 km/h) and a maximum working tire pressure of 65 psi (4.5 bar). We strongly recommend the use of ALLIGATOR Clamp-In Valves and ALLIGATOR sens.it® RS1 Sensors for vehicles that are able to drive faster than 130 mph and/or for tires with a working pressure of more than 65 psi (4.5 bar).
Sensor - technical details |
 |
|
| ALLIGATOR part no. | 590912 | |
| Sensor Type | sens.it® RS2 | |
| Attachement | Clip-Pin | |
| Radio frequency | 315MHz | |
| Identification color | green sealing plug | |
| Sensor weight | 16 gramm | |
Valve - technical details |
||
| ALLIGATOR part no. | 590916 | |
| Valve Type | Snap-In | |
| Attachement | Clip-Pin | |
| Length | TR413 | |
| For valve hole | Ø 11,3+0,4mm | |
| Fix angle | 20° | |
| max. Speed | 130 mph (210 km/h) |
